Dear customers of Plastisoltransfer s.r.o.,
Due to a public holiday, our production will be closed on Friday, May 1, 2026.
Orders will be processed again from Monday, May 4, 2026.
Thank you for your understanding.
Your Plastisoltransfer team.
DTF Glitter | Cosmic Crystal Effect
Check your price in 3 steps and order online
More Information about Transfer
DTF Glitter transfers (Cosmic Crystal Effect) are printed on a 60 cm wide roll and can be ordered by the meter.
The printable width of the film is 56 cm.
Just like with standard DTF printing, pigment inks in CMYK + white are used.
The glitter effect is created by a special glitter film that gives the design a unique shine.
Transfers are finished with a polyurethane adhesive, ensuring high flexibility and durability even after multiple washes.
Arrange your designs, motifs, or logos in portrait orientation on the desired format. See preview picture.
DTF Glitter can only be applied as Coldpeel – after pressing, the film must be allowed to cool down completely before it is slowly removed.
This process ensures an even transfer of the glitter effect without damaging fine details.
When peeling, the film may resist slightly at first – remove it carefully and evenly.
Storage
In a dust-free environment with low ambient humidity, at room temperature without exposure to direct sunlight.
How to Apply the Transfer Correctly
Ironing:
- After receiving the order, simply cut out the desired motifs.
- Pre-iron the fabric to remove any residual moisture.
- Iron the transfer onto the product for 20 seconds at a medium pressure and a temperature of 160 degrees.
- For materials such as polyester and softshell, you can reduce the ironing temperature (approximately 130 degrees) and ironing time.
- Carefully peel off the foil after pressing. In the case of cold foil, remove it after it has cooled down.
- We recommend a second ironing to the same temperature and pressure - approx. 5 sec. - preferably over a piece of cotton fabric.
Follow the ironing instructions provided with the shipment.
What Files to Upload for Print and Preview Data
- When using very thin fonts, the white underlayer is pushed to its limits. The recommended font thickness is 1-2 mm. Fine lines/dots less than 1-2 mm may not be printed.
- Files must always be presented without a background - NOT MIRRORED!
- File format: PDF. Insert data in height - 56 x 100 cm.
- CMYK color spaces are suitable for DTF printing. We work with CadLink software and the corresponding color profile.
Data preparation:
- Prepare the graphic by removing the background and setting its dimensions to 56 x 100 cm. Ensure that the graphic resolution is not lower than 300 dpi, and the colors are in CMYK mode. The minimum acceptable line thickness is 1-2 mm.
- If the graphic does not meet these requirements:
- Smaller elements may not be printed.
- There may be visible white underlayer at the edges of the graphic.
- Elements will not be adequately overprinted, which can lead to application issues.
- If the file contains white color, make sure it is defined correctly. Standard white color (RGB 255, 255, 255) will not be printed with white ink. For correct printing, the white should be defined as a special spot color – either as ‘white underbase’ or as pure white color (white).
Please note that Plastisoltransfer s.r.o. does not take responsibility for improperly prepared files by the customer, and claims regarding this matter will not be accepted.
Frequently Asked Questions about the Product:
What kind of artwork do we need from you?
To ensure a smooth process, please upload your artwork in a size of 56 × 100 cm. Colors should be prepared in CMYK and without any background. The recommended line thickness is 1–2 mm. Fine lines or dots below 1–2 mm may not print correctly.
What if your artwork contains raster elements?
Raster elements are not a problem. We will use the most suitable technology to achieve the best possible result. You can mention it in your order, but it is not required.
When can you expect your transfers?
We start working on your order immediately after it is placed. Standard production time is 2–3 working days, but after adding the order to the cart, you can also choose a faster production and shipping option to receive your transfers the next day.
Do you need help? Contact us!
Josef Apltauer guarantees the highest transfer quality
As a long-standing Production Manager at Plastisoltransfer s.r.o., Josef Apltauer has more than 30 years of experience in screen printing and transfer production. Over the years, he has been involved in countless projects – from smaller runs for regional customers to large-scale orders. Thanks to his in-depth knowledge of technologies and materials, he can provide valuable practical advice on how to achieve first-class print results. If you have any questions, feel free to contact us by email at office@plastisoltransfer.com or by WhatsApp from Monday to Friday, 7:00 a.m. to 3:00 p.m., at +420 739 323 542
Why should I choose Plastisoltransfer24?
Highest Quality Our professional products meet the highest demands and can withstand very tough conditions.
Delivery in 24 hours Thanks to our most modern machine park and flexible team, we can process large orders in a short amount of time – as quickly as one work day!
Great Price Even with relatively small print volumes, we are able to deliver reasonable prices, with large volumes we are at the top while maintaining the quality of the market.
We care! We always strive for maximum responsibility to the environment, society and employees.
